Stainless Steel anti-seize & thread sealing tape

nickel (12mmx15) (19mmx15)


Composition PTFE/nickel

used for anti-seize or sealing stainless steal 

Wras approved for potable water

Colour Silver

Length /15.1m

Width 12mm or 19mm

Temperature range

 -268c  to +  260c  for sealing use

 -268c  to + 1452c for anti-seize use


is designed to permit easy assembly and disassembly of stainless steel threaded components. It takes the place of messy and potentially contaminating anti-seize compounds. Cobas Nickel Anti-Seize Tape is manufactured from a nickel filled PTFE resin. The ptfe provides excellent lubricity while the nickel flakes act as slide or bearing plates between the two mating surfaces. Thus, the tape helps prevent galling during  the assembly and disassembly of components. When Cobas Nickel Anti-Seize tape is wrapped around a thread, it protects it from corrosive substances or any dirt and grit likely to cause seizure. Cobas Nickel Anti Seize Tape also prevent components from vibrating loose.

there are three different tapes in the anti-seize tape range


all designed for different metals the COPPER a direct replacement for copper compound NICKEL is a direct replacement for nickel compound and to stop the galling of stainless steel CERAMIC is for aluminium or were a barrier between two dissimilar metals is required 


Composition PTFE/nickel Colour Silver

Length /15.1m

Width 12mm 19mm

Thickness 0.0045"±10% / 0.115m m ±10%

Density 1.5g/cm 3±10%

Elongation 50%

Tensile strength 10-12N/m m 2

Temperature range The tape is completely thermally stable at temperatures between

 -268˚C to + 260˚C

PTFE in the tape will slowly decompose up to  400˚C . Although decomposition will occur

on contact with naked flame. Upon decomposition

the remaining nickel powder will assist disassembly.

The nickel flake will melt at /1452˚C .

SKU: nickel (12mmx15) (19mmx15)

Alternative Products