copper anti-seize & sealing tape
COBAS COPPER ANTI-SEIZE TAPE
is a unique product designed to permit the easy assembly and disassembly of threaded components.It takes the place of messy and potentially contaminating anti-seize compounds. Cobas Copper Anti-Seize Tape is manufactured from a copper filled PTFE resin. The PTFE provides excellent lubricity while the copper flakes act as slide or bearing plates between the two mating surfaces. Thus, the tape helps prevent galling during assembly and disassembly of components. When wrapped around a thread, Cobas Copper Anti-Seize Tape seals it from corrosive substances or any dirt or grit likely to cause seizure. Cobas Copper Anti-Seize Tape also prevents components from vibrating loose.
there are three different tapes in the anti-seize tape range
COPPER ,NICKEL, CERAMIC,
all designed for different metals the COPPER a direct replacement for copper compound NICKEL is a direct replacement for nickel compound and to stop the galling of stainless steel CERAMIC is for aluminium or were a barrier between two dissimilar metals is required
Composition PTFE / Copper
Widths 12mm 19mm 50mm 150mm
Thickness 0.0045"±10% / 0.115m m ±10%
Density 1.5g/cm 2±10%
Tensile strength 9-13N/m m 2
Temperature range The tape is completely thermally stable at
-268˚C / to + 260˚C
The PTFE in the tape will slowly decompose up to 400˚C . Although decomposition will occur on contact with naked flames. Upon decomposition the remaining copper powder will assist disassembly. The copper flake will melt at /1186˚C .
SKU: copper (12mmx15m) (19mmx15)